Anycubic Kobra S1 vs Anycubic Kobra 3 Max
- The Kobra 3 Max has 464% more build volume (88.2 L against 15.6 L).
- Per litre, the Kobra 3 Max is the cheaper space at $5 against $22.
- Neither manufacturer publishes a volumetric flow rate, so neither speed claim can be checked against what the hotend can melt.
- Out of stock at Anycubic US: the Kobra S1's side of this comparison is for reference.
Anycubic
Kobra S1
Out of stock at Anycubic US~$349 · 15.6 L
Enclosed multi-colour printing where filament drying matters more than the last few millimetres of bed.
Anycubic
Kobra 3 Max
~$429 · 88.2 L
Very tall or very large prints, especially props and helmets that would otherwise be cut up and glued.
| Kobra S1 | Kobra 3 Max | |
|---|---|---|
| Availability | Out of stock at Anycubic US | On sale |
| Approx. price | ~$349 | ~$429 |
| Build volumex × y × z converted to litres, so three numbers become one comparable one | 15.6 L | 88.2 L |
| Dimensions | 250 × 250 × 250 mm | 420 × 420 × 500 mm |
| Per litre | $22 | $5 |
| Type | FDM enclosed | Large-format FDM |
| Motion | CoreXY | bedslinger |
| Max flowthe hotend's rated volumetric flow — what actually caps print speed | not published | not published |
| Real line speedestimated from flow at a 0.4 mm nozzle and 0.2 mm layer | not published | not published |
| Max speedthe manufacturer's claim — gantry movement, not extrusion | 600 mm/s | 600 mm/s |
| Hotend max temp | 320 °C | 300 °C |
| Bed max temp | 120 °C | 90 °C |
| Enclosure | Enclosed, unheated chamber | Open frame |
| Extruder | direct drive | direct drive |
| Auto level | strain-gauge | strain-gauge |
| Hardened nozzle | Yes, as standard | No |
| Multi-material | ACE Pro, 4 slots | ACE Pro, 4 slots |
| True multi-material priceprinter plus the changer it is photographed with | ~$399 | ~$499 |
| Firmware | Klipper | Klipper |
| LAN-only mode | Yes | Yes |
| Camera | Yes | No |
| Assembly | Pre-assembled | Partly assembled |
| Noise | — | — |
| Released | 2025 | 2024 |