Enclosed printers for ABS and ASA
An enclosure that merely traps heat is not the same as one that drives it. ABS and ASA stop curling off the plate at around 60 °C of chamber air, which only an actively heated chamber reaches reliably. Heated chambers first, then passive enclosures.
How this list is ordered17 printers, enclosed printers ordered by actively heated chamber temperature, then by hotend temperature.
First on that measure is the QIDI Q2 at 65 °C heated chamber.
- 1
65 °C heated chamber
- 2
65 °C heated chamber
- 3
65 °C heated chamber
- 4
65 °C heated chamber
- 5
65 °C heated chamber
- 6
65 °C heated chamber
- 7
65 °C heated chamber
- 8
60 °C heated chamber
- 9
55 °C heated chamber
- 10
enclosed, chamber not heated
- 11
enclosed, chamber not heated
- 12
enclosed, chamber not heated
- 13
enclosed, chamber not heated
- 14
enclosed, chamber not heated
- 15
enclosed, chamber not heated
- 16
enclosed, chamber not heated
- 17
enclosed, chamber not heated
