Anycubic Photon Mono M7 Pro vs Anycubic Photon P1
- Build volume is effectively the same on both, near 6.5 L.
- Per litre, the Photon Mono M7 Pro is the cheaper space at $87 against $107.
Anycubic
Photon Mono M7 Pro
~$562 · 6.5 L
Long batch runs at fine detail, where topping up the vat mid-print is the bottleneck.
Anycubic
Photon P1
~$689 · 6.5 L
Two-colour or rigid-plus-flexible resin models that no single-vat printer can produce.
| Photon Mono M7 Pro | Photon P1 | |
|---|---|---|
| Approx. price | ~$562 | ~$689 |
| Build volumex × y × z converted to litres, so three numbers become one comparable one | 6.5 L | 6.5 L |
| Dimensions | 223 × 126 × 230 mm | 223 × 126 × 230 mm |
| Per litre | $87 | $107 |
| Type | Resin MSLA | Resin MSLA |
| Motion | gantry | gantry |
| XY resolutionplate width divided by pixels across it — the comparable figure, not the K number | 16.8 µm | 16.8 µm |
| LCD resolution | 13312 × 5120 | 13312 × 5120 |
| Release film | ACF | ACF |
| Vat capacity | 700 ml | 700 ml |
| Multi-material | None | dual-tank kit, 2 slots |
| True multi-material priceprinter plus the changer it is photographed with | — | ~$712 |
| Firmware | proprietary | proprietary |
| LAN-only mode | Yes | Yes |
| Camera | Yes | Yes |
| Assembly | Pre-assembled | Pre-assembled |
| Noise | — | — |
| Released | 2025 | 2026 |