Resin MSLA~$489Anycubic · released 2025
Anycubic Photon Mono M7 Pro
A 14K panel over a 223 mm plate produces a 16.8 µm pixel across a print area twice the size of the Mars-class machines — the combination that Elegoo's Saturn range makes you choose between, since its 16K model gains pitch by giving up width. Automatic resin refill is the feature that separates this from the rest of the field: a sealed bottle feeds the vat and keeps the level constant through a long batch, which removes both the mid-print top-up and the guesswork about whether there is enough resin to finish. Quoted at up to 170 mm/h with high-speed resin. Pixels are non-square here too, 16.8 µm across and 24.8 µm along Y, so detail is better resolved in one direction than the other — a detail Anycubic's marketing leaves to the specification table.
- Approx. price
- ~$489
- Build volume
- 6.5 L
- Per litre
- $76
- XY pixel
- 16.8 µm
Best forLong batch runs at fine detail, where topping up the vat mid-print is the bottleneck.
Specifications
- Build volume
- 223 × 126 × 230 mm
- Volume
- 6.5 L
- Motion
- gantry
Optics and handling
- LCD resolution
- 13312 × 5120 px
- LCD size
- 10.1 in
- XY resolution
- 16.8 µm
- Layer height
- from 10 µm
- Release film
- ACF
- Vat capacity
- 1000 ml
- Multi-material
- None offered
- Firmware
- proprietary
- Cloud
- Optional
- Camera
- No
- Assembly
- Pre-assembled
- Weight
- 12.8 kg
- Footprint
- 312 × 315 × 520 mm
Features
- 10.1-inch 14K panel, 13312 × 5120 — a 16.8 µm pixel
- Automatic resin refill from a sealed bottle
- 223 × 126 × 230 mm plate with a 1-litre vat
- ACF film, a heated vat and up to 170 mm/h quoted
- COB LighTurbo 3.0 optics with collimation under 3°
What it does well
- Fine 16.8 µm pitch without giving up plate width, which the competing 16K machines do
- Automatic resin refill removes mid-batch top-ups and the risk of running dry overnight
- 1-litre vat plus refill makes long unattended runs practical
- Heated vat keeps resin at working temperature, so a cold room does not slow it down
- Twice the plate area of the Mars and Mono 4 class at a fine pitch
Where it gives ground
- Non-square pixels: 16.8 µm across X but 24.8 µm along Y
- Automatic refill is another sealed system handling corrosive resin, and another thing to clean
- Anycubic's software remains the weaker ecosystem
The points above are read off published specifications, not from owner reports.
What owners report
No owner discussion has been collected for the Anycubic Photon Mono M7 Pro yet. Everything on this page comes from the manufacturer’s published specifications and the sources listed under how we compare. We would rather say so than write sentiment we have not read.
