Anycubic Photon Mono M7 Max

Largest resin printer here, and the clearest illustration of why pixel pitch has to be computed rather than read off a badge: this is a 7K machine, a lower number than the 14K M7 Pro, and its pixel is 46 µm — nearly three times coarser — because those 6480 pixels are spread across a 298 mm plate instead of a 223 mm one. That is not a flaw, it is the trade. Fourteen and a half litres of resin volume prints terrain, busts and full helmets in one piece, at a detail level that is still finer than any FDM machine can manage but visibly short of the miniature-focused printers. The two-litre vat holds enough resin for a full plate. Buy it for size, and keep a Mars or Mono 4 for faces.

Approx. price: ~$861
Build volume: 14.7 L
Per litre: $59
XY pixel: 46 µm

LAN-only modeproprietary firmware

Best forLarge resin prints — terrain, busts, helmets — where size beats fine detail.

Specifications

Build volume: 298 × 164 × 300 mm
Volume: 14.7 L
Motion: gantry

Optics and handling

LCD resolution: 6480 × 3600 px
LCD size: 13.6 in
XY resolution: 46 µm
Layer height: from 10 µm
Release film: ACF
Vat capacity: 2000 ml
Multi-material: None offered
Firmware: proprietary
LAN-only mode: Yes
Cloud: Optional
Camera: Yes
Assembly: Pre-assembled
Weight: 17 kg
Footprint: 370 × 350 × 580 mm

Features

13.6-inch 7K panel over a 298 × 164 mm plate — a 46 µm pixel
298 × 164 × 300 mm, the largest resin volume here
2000 ml vat sized for a full plate
ACF release film and a monitoring camera
Automatic levelling

What it does well

By far the largest resin plate here, printing busts and helmets in one piece
Two-litre vat means a full plate does not need topping up
Still substantially finer than any FDM machine, despite the coarse pitch for resin
ACF film and a camera on a machine whose prints run very long

Where it gives ground

46 µm pixel is nearly three times coarser than the M7 Pro — 7K over a large plate, not more detail
A 2-litre vat is a lot of expensive, hazardous liquid to handle and clean
Washing and curing parts this size needs equipment most people do not own
No heated vat, and it is physically large and heavy

The points above are read off published specifications, not from owner reports.

What owners report

No owner discussion has been collected for the Anycubic Photon Mono M7 Max yet. Everything on this page comes from the manufacturer’s published specifications and the sources listed under how we compare. We would rather say so than write sentiment we have not read.