Bambu Lab X2D vs QIDI Q2
- The Q2 has 10% more build volume (18.7 L against 17.0 L).
- Per litre, the Q2 is the cheaper space at $27 against $38.
- Only the X2D publishes a flow rate (40 mm³/s, roughly 500 mm/s of line speed), so the other's speed claim cannot be checked.
Bambu Lab
X2D
~$649 · 17.0 L
Printing ABS, ASA and nylon properly without stepping up to an H-series price.
QIDI
Q2
~$499 · 18.7 L
Engineering materials — PC, nylon, ABS — on the smallest sensible budget.
| X2D | Q2 | |
|---|---|---|
| Approx. price | ~$649 | ~$499 |
| Build volumex × y × z converted to litres, so three numbers become one comparable one | 17.0 L | 18.7 L |
| Dimensions | 256 × 256 × 260 mm | 270 × 270 × 256 mm |
| Per litre | $38 | $27 |
| Type | FDM enclosed | FDM enclosed |
| Motion | CoreXY | CoreXY |
| Max flowthe hotend's rated volumetric flow — what actually caps print speed | 40 mm³/s | not published |
| Real line speedestimated from flow at a 0.4 mm nozzle and 0.2 mm layer | 500 mm/s | not published |
| Max speedthe manufacturer's claim — gantry movement, not extrusion | 1000 mm/s | 600 mm/s |
| Hotend max temp | 300 °C | 370 °C |
| Bed max temp | 120 °C | 120 °C |
| Enclosure | Heated chamber to 65 °C | Heated chamber to 65 °C |
| Extruder | direct drive | direct drive |
| Auto level | eddy-current | strain-gauge |
| Hardened nozzle | Yes, as standard | Yes, as standard |
| Multi-material | second nozzle, 4 slots | QIDI Box, 4 slots |
| True multi-material priceprinter plus the changer it is photographed with | ~$899 | ~$698 |
| Firmware | Bambu | Klipper |
| LAN-only mode | Yes | Yes |
| Camera | Yes | Yes |
| Assembly | Pre-assembled | Pre-assembled |
| Noise | 52 dB | — |
| Released | 2026 | 2026 |