Sovol SV06 Plus ACE

Same open-Klipper philosophy as the SV06 ACE, scaled up to a 300 × 300 × 350 mm bed for $60 more. Thirty-one and a half litres at $299 puts it among the best volume-per-dollar machines here, and unlike the very large Elegoo and Anycubic bed-slingers it keeps the eddy-current bed scanning, which is the feature that stops a big plate's flatness variation ruining first layers. It is still an open frame with a 100 °C bed, so this is a large PLA and PETG machine. The assembly is more involved than the smaller model simply because the parts are bigger, and Sovol's instructions expect a little patience. For a maker who wants a big printer and full control of its firmware, there is not much else at this price.

Approx. price: ~$299
Build volume: 31.5 L
Per litre: $9
True multi-material price: No changer offered

Real speed ceiling

Not published

Sovol does not publish a volumetric flow rate for the SV06 Plus ACE, so its 500 mm/s claim cannot be checked against what the hotend can actually melt. We do not estimate one.

LAN-only modeKlipper firmware

Best forLarge prints on an open-firmware machine you intend to modify and maintain yourself.

Specifications

Build volume: 300 × 300 × 350 mm
Volume: 31.5 L
Motion: bedslinger
Max speed: 500 mm/s
Acceleration: 20,000 mm/s²
Max flow: Not published
Hotend max temp: 300 °C
Bed max temp: 100 °C
Enclosure: Open frame
Extruder: direct drive
Auto level: eddy-current
Hardened nozzle: No
Input shaping: Yes

Materials, control and build

Multi-material: None offered
Firmware: Klipper
LAN-only mode: Yes
Cloud: Optional
Camera: No
Assembly: Partly assembled
Weight: 12 kg
Footprint: 490 × 480 × 600 mm

Features

300 × 300 × 350 mm — 31.5 litres
Open Klipper firmware with root access
Eddy-current bed scanning across a large plate
Planetary direct-drive extruder, 300 °C hotend
Individual spare parts available for everything

What it does well

31.5 litres at $299 is among the best volume-per-dollar here, and with open firmware
Eddy-current scanning handles large-plate flatness better than a touch probe
Full root access and complete spare-part availability
Only $60 over the 220 mm model for 2.6 times the volume

Where it gives ground

Open frame and a 100 °C bed rule out large parts in ABS or ASA
More involved assembly than the smaller SV06 ACE
No camera on a machine that runs long prints
No published flow rate, and fit and finish trail the mainstream brands

The points above are read off published specifications, not from owner reports.

What owners report

No owner discussion has been collected for the Sovol SV06 Plus ACE yet. Everything on this page comes from the manufacturer’s published specifications and the sources listed under how we compare. We would rather say so than write sentiment we have not read.